#VLC STREAMER FOR PC HOW TO#
#VLC STREAMER FOR PC FULL#
#VLC STREAMER FOR PC SOFTWARE#
#VLC STREAMER FOR PC PC#

Now you will see the same dialog as below Now click on the Media from menu and then Stream from the menu list. Now after you check that you are able to ping the system now to stream the video follow the below steps: If it is receiving the ping successfully that means you can stream your video to that ip.įor example, I am showing you by ping to my own system.Īs you can see there is 0% packet loss here.

#VLC STREAMER FOR PC PC#

So then how can you send the stream to the PC available in the internet, First you have to make sure that whatever system you are sending the stream to should be present in the public sub net, It simply means you should be able to ping that system from your system, to check whether are you able to ping a system or not open your terminal in Ubuntu and then run the following command ping destination_ip_address You just can't send the packets to any computer in the internet as they won't receive it because the routers will decline the packets coming from unknown resources so even if the VLC application in your system is showing that you are sending the stream properly it doesn't mean that it is reaching to the destination properly. I just want to know how can I add the IP so that destination will look like dst= myReceiverIP:port. It is clearly visible that the dst=:8080 but it didn't mention on which IP it should stream. If I didn't give any IP so how it will know where to stream, If in the above step I just click on next after choosing port number it will show me to choose codec If i choose the codec then in the next screen it will give me the stream string output, Now in this stream string output which is given below :sout=#transcode :no-sout-all :sout-keep

#VLC STREAMER FOR PC FULL#

Now it is showing me the full path of the video so I clicked on next.ĥ.Now in the destination setup window I choosed http from drop down menu and click on Add but here the problem is it is only giving me the option to choose the port number and giving some path but not giving the option of entering the IP address of the receiver side.

Here what steps I have followed till now:

#VLC STREAMER FOR PC HOW TO#

I have read the steps of how to do the streaming of the video from hereīut here they have explain how you can stream from the PC and use the same one to receive the video but I want to stream to the other computer. Stream Example: rtsp://192.168.1.210:554/LiveChannel/0/media.smpĮxample URL - rtsp://192.168.1.I want to stream a video from my computer to another computer using http in vlc. Note: LiveChannel/0/ where “0” equals the channel number. They sometimes use the Hikvision APIsĮxample URL: rtsp://192.168.1.210/h264.sdp You may have to contact support for your specific model.

#VLC STREAMER FOR PC SOFTWARE#

Note: Swann uses various lines of hardware and software and RTSP streams. Swann camera RTSP where 0 = mainstream and 1 = substream Samsung / Hanwha Techwin Camera RTSP - stream type either 1 for mainstream or 2 for substreamĮxample URL: will bring up mainstream for a camera on 192.168.1.210 c1 would be channel 1, c2 channel 2, etcĮxample URL: will bring up substream for channel 2.Įxample URL rtsp://192.168.1.210/axis-media/media.ampĪvigilon RTSP RTSP streams must be generated in the web UI of the camera under compression and image rate.

You can also encode credentials into the URL by entering it prior to the IP address - for example.Įxample URL: will bring up mainstream for channel 1, where admin is the username and 12345 is the password. This RTSP stream would mainstream channel 1 on an NVR at 192.168.1.210. 201 would produce the channel #2 of the NVR and mainstream and 202 would produce channel #2 and substream.Įxample: rtsp://192.168.1.210:554/Streaming/Channels/101 Changing the to 102 would create channel 1 and stream #2. streaming channel - for example “101” would be channel 1 and stream #1 (mainstream).

The of main stream is 0, extra stream 1 is 1, extra stream 2 is 2.Įxample URL: will bring up substream for channel 1 Some Common RTSP URLS: Dahua RTSP stream (Cameras & - the IP address of the IP Camera. This will indicate if the camera is having a bandwidth issue and is dropping packets.

When we are testing for packet loss you will select 'Tools' and then 'Codec Information'. If all is successful it will display the RTSP stream. Enter the Camera specific RTSP stream.Īfter entering in the URL and pressing Play you should be prompted to put in the cameras Username and Password. You must test it with VLC because the way the software pulls the stream in is through RTSP on port 554.ģ. Navigating to the cameras web interface does not mean that the camera will work. If a camera cannot connect using VLC it will give us a better idea of what is going on with the camera.

This is to test the RTSP stream and make sure it is connecting. You will have to test the camera using VLC media player. You may run into issues with a camera connecting or after setting up a camera you may see a red X.

Vlc streamer for pc